DynaWear (Urethane/Ceramic)
The best answer to high wear or impact wear areas. DynaWear urethane/ceramic brick panels are an advanced performance material that provides the benefit of ceramic with a greater tolerance to impact from hard/large/heavy bulk materials, tramp materials or hammer blows. The combination of materials consists of long wearing ceramic brick epoxied or welded to an expanded metal sheet, then completely embedded in a urethane matrix. The urethane cushions each brick independently while encapsulating the brick to resist loss due to breakage. Each panel is custom manufactured to the applications specific size and impact requirements.
Available Thickness
The ceramic brick is available from 1/4" to 2" thick. With the urethane backing (which normally equals the thickness of the brick used), the finished panel thickness ranges from 1/2" to 4" overall. Sample weights are approximately: 1/4" on 1/4" (1/2" OA) = 8.25 pounds and 1/2" on 1/2" (1" OA) = 16.5 pounds per square foot.
|
|
Fastening Method
DynaWear panels are installed using pre-installed steel or stainless steel studs (stud location designed per application) or via plug welding through the work surface of the panel.
| BENEFITS: |
 |
Non-corrosive |
|
Out wears other liners |
|
Eliminates lost brick |
|
Encapsulated ceramic brick |
|
Easy to install |
|
Customized to fit |
Temperature Limitation
The upper operating temperature limit of the standard DynaWear panel is 200°F. However, a special formulation is available for higher temperature (<350°F) applications and/or areas with high moisture (total immersion).
DynaWear offers the benefits of ceramic but overcomes the weakness, namely loss of brick due to breakage. In high wear/high impact areas the best solution is DynaWear.
Email or call us
today!
|
